restoration

Mosaic Tiled Floor and Basalt Tiles Before and After

Basalt and Glass Mosaic tiles in a wet room London N6

This property in London N6 had been rented out previously by the owners and they were now renovating it before moving back in, this work included a wet room which had glass mosaic floor tiles and a dark Basalt tile laid on the wall. The main problem had been a general lack of maintenance over the years which led to a major unsightly build-up of lime scale throughout the wet room. We agreed to do the work but had to explain to the client how difficult the work would be and set their expectation for only an eighty percent improvement. I must apologise in advance for the quality of some of the photographs on this page, the size of the room, low lighting a nature of the stone surfaces didn’t lend themselves well to being photographed.

Mosaic Tiled Floor and Basalt Tiles Before Mosaic Tiled Floor and Basalt Tiles Before

Day 1 -Cleaning Basalt and Mosaic Tiles

Having protected all the chrome furnishings within the wet room we started to soak the Basalt tiled walls with Tile Doctor Grout Clean-Up followed by scrubbing and rinsing constantly with clear water. Grout Clean-up is an Acid based product so you do need to take care when doing this however it is particularly effective at shifting mineral deposits like Limescale. When we were satisfied this had removed the majority of soap scum and lime scale we proceeded to clean the Glass Mosaic floor tiles using the same method.

Day 2 -Polishing Basalt wall Tiles

The basalt tiled walls now needed to be restored back to their original factory condition using small diamond encrusted burnishing pads attached to a hand held polishing machine. We started with a coarse pad which removed any remaining Limescale which had impregnated the surface of the stone and moved onto the finer pads which polish the stone. Once this was complete the tiles were given a final clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product designed for regular use on stone or sealed tiled surfaces.

Day 3 -Sealing Basalt wall Tiles

We came back on the third day and after making sure the Basalt tiles had dried we gave it a final buffing to restore the stone to a deep high gloss shine. The last step was to seal the Basalt tile in order to protect it and make it easier to clean in the future and for this we applied three coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone.

Finally we used a rotary floor polisher fitted with a white buffing pad to buff the mosaic glass floor to a high shine.

Mosaic Tiled Floor and Basalt Tiles After Mosaic Tiled Floor and Basalt Tiles After

 

Tiled wet room cleaned and polished in North London

Basalt and Glass Mosaic tiles in a wet room London N6 Read More »

Textured Marble floor in Chesham After

Polishing a Textured Marble Tiled floor in Chesham

A customer recently purchased a property the village of Chesham and hoped we could improve the appearance of her textured marble tiled floors which had over a number of years become dull and lost the polished marble look one would expect from a floor of this quality.

Marble Tile Cleaning and Polishing

For polished stone like Marble and Limestone the only way to restore the finish is to burnish the floor and this floor was no different. The burnishing pads are diamond encrusted and come in a setup of four seventeen inch pads for use with a heavy rotary machine, each pad having a different purpose.

So we started with the Red pad which is designed to remove sealers together with a little water, we then took the opportunity to clean up the grout by applying a dilution of Tile Doctor Pro-Clean and scrubbing it into the grout lines to get them clean. Next step was to remove the soiled cleaning solution and wash the floor down with water before moving onto the white burnishing pad which will grind off ingrained dirt and is the first step in polishing the floor. We then completed the floor polishing using the Yellow then Green polishing pads which smooth down the surface and produce a shiny finish.

Textured Marble floor in Chesham Before

Sealing Textured Marble Tiles

Once the floor was polished we applied Tile Doctor Shine Crystallising Powder to the marble tile using a rotary machine fitted with a white polishing pad. This last step gives a very deep high shine as well as a tough durable finish.

Textured Marble floor in Chesham After
When the customer returned she asked was it safe to walk on as the floor as at first glance it looked wet; we assured her this is the Tile Doctor high shine appearance and is perfectly ok.

Textured Marble Floor Tiles Cleaned and Polished in Buckinghamshire

Polishing a Textured Marble Tiled floor in Chesham Read More »

Ceramic Tile and Grout Before and After

Grout colour seal and Ceramic tile clean in Chalfont St Giles

We were asked to improve the appearance of this Ceramic tiled floor and Grout installed in a kitchen in Chalfont St Giles which over a few years had become difficult to keep clean and the grout lines had become stained and discoloured.

Ceramic Tile and Grout Before Ceramic Tile and Grout Before

Cleaning Tile and Grout

Our first task on day one was to clean the Ceramic tiles and Grout so we created a diluted 50/50 mixture of tile doctor Pro-Clean and Nanotech UltraClean, the two products combine to provide a very powerful tile friendly alkaline cleaner with tiny sized abrasive particles. This was left to soak into the tile and grout before being agitated and scrubbed with a scrubbing machine running on low speed. We also used stiff grout hand brushes along the grout lines. Once we were happy with the overall condition of the tile and grout it was washed down using clean water and the resultant soiled solution extracted from the floor using a wet vacuum. I’m pleased to say that using this method we were able to return the tile and grout back to its original colour.

Whilst this was a fantastic transformation the grout lines being porous would untreated soon become dirty and discoloured. The only answer to this problem is a permanent colour seal to the grout lines which not only aids the future floor cleaning, but improves the whole appearance of the floor.

Applying the Grout Colour

Before applying a Grout Colour it’s important to ensure the grout is clean of grease and dirt naturally we had just cleaned this floor so this was not a problem I only mention it in case you were considering taking on a similar task yourself.

Once the grout has dried you can start applying the colourant which is a relatively straightforward process of squeezing the product onto a toothbrush and running it onto the grout. Don’t be tempted to use an old toothbrush for this purpose as it may contaminate the colourant leading to discolouration in the finish.

We completed the project the next day using an Aqua Mix sand coloured Grout Colourant; the customer was extremely pleased and commented how whole clean and efficient the process was.

Ceramic Tile and Grout After Ceramic Tile and Grout After

 

Tile Cleaning and Grout Colouring in Buckinghamshire

Grout colour seal and Ceramic tile clean in Chalfont St Giles Read More »

Terracotta Tiles Before and After Sealing

Terracotta Kitchen Tiles Deep Cleaned in Great Missenden

This customers Terracotta tiled floor was installed in the kitchen of a house in Great Missenden and had become ingrained with dirt and soiling over the last twenty years leaving an unsightly black greasy appearance which was impacting the sale of the property.

Cleaning Terracotta Tiles

On the first day we covered the floor with a strong dilution of Tile Doctor Pro Clean which is a heavy duty Tile Stone and Grout Cleaner mixed 50/50 with Tile Doctor Ultra Clean which adds abrasive particles into the mix. The resulting combination provides a powerful cleaning agent that penetrated deep into the tile and in conjunction with a rotary machine fitted with a scrubbing pad managed to remove several layers of soiling. We then rinsed the floor with fresh water and removed the vast amount of slurry with a wet vacuum.

Terracotta Tiles During Cleaning
The next step of our cleaning process was to apply Tile Doctor Remove and Go across the tiles and let it soak in as before; Remove and Go is a coatings remover that will strip the floor of any seal or wax coatings which had been applied to the floor over the years, again the product was worked in using a scrubbing pad and then washed off.

Once we were happy with all cleaning and seal and wax removal and the floor had returned to its original condition we left the floor to dry.

Terracotta Tiles After Sealing

Sealing Terracotta Floor Tiles

Once the floor was dry we started to seal it in order to protect it and for this we chose Seal and Go which not only leaves a surface protection but also brings though the true colour of the stone returning the floor to its original beauty, Terracotta is very porous and it took seven coats before it was fully sealed.

Our customer was very happy with the difference and I have since been informed they have received a first offer on the property.

 

Terracotta tiles deep cleaned in Great Missenden, Buckinghamshire.

Terracotta Kitchen Tiles Deep Cleaned in Great Missenden Read More »

Travertine Floor Aylesbury After

Honed Travertine Tiled floor Re-Sealed in Aylesbury

Details below of a newly laid Travertine Honed & Filled floor in Aylesbury that needed stripping and re-sealing. The work was done at the request of a building company who had just completed a pair of semi-detached houses laid with Travertine tiles on the ground floor. Unfortunately the tiling contractor had failed to clean the tile surface properly before sealing and had trapped particles of dust and debris into the sealer, as a result the whole floor was as rough as sandpaper and needed to be stripped and re-sealed prior to their clients moving in the following week.

Travertine Floor Aylesbury Before

Cleaning Travertine Tile

To remove the existing sealer and to polish the stone we used the Tile Doctor diamond burnishing system. This involves burnishing the floor with diamond encrusted pads fitted to a heavy rotary machine, the system consists of a set of four seventeen inch coloured pads and you work your way through the pads from red (sealer removal) through to green (final polishing). This work returned the stone to its original condition ready for sealing.

Travertine Floor Aylesbury After

Sealing Travertine Tile

We sealed the floor with three coats of Tile Doctor Colour Grow which provides excellent stain protection whilst enhancing the natural colours in the stone. The building company was pleased that we had managed to resolve the problem before the owners moved in as it had avoided an embarrassing situation for them. Interestingly we have since completed three other jobs with this same type of problem.

Sealing Honed and Filled Travertine tiled floors in Buckinghamshire

Honed Travertine Tiled floor Re-Sealed in Aylesbury Read More »

Scroll to Top