We were asked by the new owners of this property in Marlow to clean and seal the Limestone tiled kitchen floor which was in a heavily soiled condition and it was apparent that the tiles and the grout lines hadn’t been professionally cleaned for some time.
Cleaning a Limestone Tiled Floor
To lift the ingrained soiling and restore the grout we started by applying a dilution of Tile Doctor Pro-Clean which was hand scrubbed into the grout lines with a stiff grout brush, this was followed up with Tile Doctor Grout Clean-Up which returned the grout lines to the original colour. The resultant soiled solutions were then removed from the floor with the aid of fresh water and an industrial wet vacuum.
Polishing Limestone Tiles
Our next task was to re-hone the stones using the Tile Doctor Diamond encrusted burnishing pad system which cleans and polishes natural stone returning it to its original condition. The pads come in a set of four and you start with the coarse pad together with a little water. This this cuts through and removes surface grime, dirt and any remaining sealer. The floor is then rinsed and you move on through the remaining pads until the polish has been restored to the tiles. This process took up much of the first day so the floor was given a final rinse and left to dry overnight.
Sealing Limestone Tiles
On the second day we returned to find the tiles had dried and as expected and we started to seal the tile which we did with two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that soaks into the pores of the stone bringing out the natural colours whilst providing that all important lasting protection.
The customer was amazed with the clean appearance of her tiled floors and said it had transformed her house ready to live in.
Limestone Tile Cleaning and Polishing in Marlow, Buckinghamshire
These Travertine tiles were laid five years ago at a residential property in Ashton Clinton and our client had never been entirely happy with the tillers finish from sealing which was marked with smears and also had the tillers bare footed prints embedded within the seal. The sealer was now wearing off and polish fading so it was due to be re-done and we were given the call.
Burnishing a Travertine Tiled Floor
The owner had maintained the floor well so we set to work removing the old sealer using rotary machine fitted with a coarse number One diamond encrusted burnishing pad and a little water. The resultant slurry was rinsed off and removed using a powerful wet vacuum the grout lines were given a good scrub by hand using a stiff brush and Tile Doctor Grout clean–up. With the same method we cleaned and polished the tiles with the number Two and Three burnishing pads followed by a final clean and rinse and then left to dry overnight.
Sealing and Polishing Travertine Tile
The next day the tiles had completely dried we used the final number Four burnishing pad which is a very fine pad to polish and add shine to the travertine floor. The last stage was to seal the Travertine which we did with two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that brings out the colours in natural stone and provide lasting protection.
Travertine Tile Cleaning and Polishing in Ashton Clinton, Buckinghamshire
This commercial unit in Aylesbury had white porcelain tiles laid in the restroom and reception areas several years prior and had been assured they would be easy to clean, however over the years they had deteriorated leaving an unsightly grey staining throughout and were now in need of a thorough deep clean.
Cleaning White Porcelain Tiles
A mixture of Tile Doctor Pro-Clean combined with NanoTech UltraClean impregnating cleaner products was spread evenly across the tiles and worked into the floor using a rotary scrubbing machine set on slow speed. We proceeded to work the floor in this manner to lift the soling followed by black stripping pads on a 150rpm rotary machine. When we were satisfied that the ingrained dirt had been lifted from the porcelain tile we used our van mounted pressure cleaning system to wash the dirt from the floor, this system has been a great investment for us and uses heat and high pressure to clean and remove the slurry back to recovery tanks in the van.
We let the floor dry and returned the second day to scrub along the stained grout lines and return them to their original colour using a strong mix of Tile Doctor Grout clean-up and with this solution rescrubbed the areas using our rotary machines and with a complete final clean and rinse buffed the tiles to a high shine.
Our customer in Beaconsfield had been having great difficulty cleaning a textured Porcelain tiled floor that was installed in the kitchen and adjacent dining room; despite numerous attempts whatever she tried never have the desired effect. During the home survey we demonstrated on a single tile how using our cleaning agents we could remove the soiling and restore the original colour of the tile which hadn’t been seen for a number of years.
Scrubbing Micro-Porous Textured Porcelain Tiles
Equal amounts of Tile Doctor Pro-Clean combined with Tile Doctor NanoTech UltraClean was spread evenly throughout the floor and worked in with a rotary machine fitted with a scrubbing pad running at slow speed. The tiny abrasive particles in the cleaning solution worked deep into the tile to bring out the dirt so once the whole floor was treated in this manner we switched to the next machine.
The next machine we used was a truck mounted device that directs hot water onto the tile at high pressure using a second hose to remove the soiled solution back to a storage tank in the van. It’s a very effective machine that has an instant effect on the tile.
Once this process was completed we scrubbed out the grout lines using a mix of Tile Doctor Grout Clean-Up which did a good job of cleaning the grout and also removed any soiling left from our previous clean. Once this was done we gave the floor a final clean and rinse and then left to dry overnight.
Sealing Micro-Porous Textured Porcelain tiles
Most porcelain tiles like ceramics won’t take a sealer however Micro-Porous Porcelain tiles do need sealing due to their porosity so we came back the 2nd day to apply two coats of Tile Doctor Seal And Go which will protect the tile from staining and aid the future maintenance. I should mention that we recommended the use of Tile Doctor Neutral tile cleaner for regular maintenance; its neutral PH formula is ideal for sealed floors as domestic acidic cleaners will eat away at the sealer over time and reduce its life.
Our client’s project was to refurbish four toilets in a London Night Club but didn’t want the expense of replacing all the existing ceramic floor and wall tiles; after come across our web site we were invited to visit the club and provide a demonstration after which we were awarded the contract. Our main task on this project was to deep clean the ceramic wall tiles and floors and colour seal grout lines which had over the years had stained to a yellow appearance.
Night Club Toilet Cleaning Day One
We started by giving all the tiles a though deep clean with Tile Doctor Pro-Clean which is a strong alkaline cleaner that is able to penetrate into the tile and lift the years of built up soiling on the tile and grout lines. This was followed with a further treatment of on the wall tile grout lines using Tile doctor Grout Clean up and another deep clean with Pro-Clean and pressure cleaned using our powerful truck mounted system which cleans under heat and high pressure and returns all the slurry to our recovery tanks for disposal.
Night Club Toilet Cleaning Day Two and Three
The tiles looked fantastic and like new again with the exception of the grout lines which although being deep cleaned of twenty years of dirt and grease still had a yellow appearance. The solution was to use a Grout Colourant to colour all the grout lines white again, the product we use is brilliant as not only does it give the appearance of newly applied grout is also protects the grout with a waterproof and stain proof barrier that is very easy to clean. Once dried we removed all the excess grout colourant residue from the tile and then polished the tiles to a pleasing high shine.
The client was totally satisfied and impressed with our work which cost a fraction of what it could of cost to replace all the wall tiles. In fact a member of the management team was adamant that we had replaced the tile and grout as he thought it impossible we could of managed this good as new look any other way.
These Riven Slate tiles at house in Tring Buckinghamshire had been laid five years earlier and the original sealant had worn off especially around the high traffic cooker and fridge areas. This has led to dirt getting trapped into the pores of the tile and the whole floor becoming rather dull.
Cleaning Riven Slate Floor Tiles
We started with a strong dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaner designed for use on tile, stone and grout. It was scrubbed into the tile and grout lines to give the floor a deep clean and then rinsed with clean water. To strip the remaining sealant we used Tile Doctor Remove and Go spread throughout the floor and then left for 45 minutes to soften the sealant, then with the use of an aggressive black pad fitted to a rotary machine the remaining sealant was stripped from the tile. The last step was to rinse the floor with clean water to remove any cleaning products and neutralise it before sealing, it was then left overnight to dry.
Sealing Riven Slate Tiles
The next day we came back to seal the floor, the customer had previously requested a matt finish for the floor so Tile Doctor Colour Grow was chosen as the sealer, this product provides the desired matt finish but also lifts the natural colours in the stone as well as providing the necessary stain protection going forward.
Cleaning and Sealing a Slate Tiled Floor in a London shop
We were asked to clean these textured ceramic floor tiles in Wendover Bucks which had become heavily soiled and ingrained with dirt leaving the tiles with a black appearance, the grout lines had also become stained and discoloured. Our customer had tried all types of cleaning agents but could never get the desired effect.
Cleaning a Textured Ceramic Tiled Floor
A dilution of Tile Doctor Pro-Clean alkaline tile cleaner was applied throughout the tiled floor and worked in with the aid of a scrubbing pad fitted to a rotary machine, a stiff hand brush was also used along the grout lines and this managed to lift most of the soiling from the floor.
Next step was to use our powerful truck mounted heated turbo system which jet washed the remaining particles out of the crevasses of the stone. This system uses high pressure heated water though a spinner tool, it’s an amazing tool that returns the dirty water directly back to a recovery tank leaving the floor chemical free and neutralised.
This property in London N6 had been rented out previously by the owners and they were now renovating it before moving back in, this work included a wet room which had glass mosaic floor tiles and a dark Basalt tile laid on the wall. The main problem had been a general lack of maintenance over the years which led to a major unsightly build-up of lime scale throughout the wet room. We agreed to do the work but had to explain to the client how difficult the work would be and set their expectation for only an eighty percent improvement. I must apologise in advance for the quality of some of the photographs on this page, the size of the room, low lighting a nature of the stone surfaces didn’t lend themselves well to being photographed.
Day 1 -Cleaning Basalt and Mosaic Tiles
Having protected all the chrome furnishings within the wet room we started to soak the Basalt tiled walls with Tile Doctor Grout Clean-Up followed by scrubbing and rinsing constantly with clear water. Grout Clean-up is an Acid based product so you do need to take care when doing this however it is particularly effective at shifting mineral deposits like Limescale. When we were satisfied this had removed the majority of soap scum and lime scale we proceeded to clean the Glass Mosaic floor tiles using the same method.
Day 2 -Polishing Basalt wall Tiles
The basalt tiled walls now needed to be restored back to their original factory condition using small diamond encrusted burnishing pads attached to a hand held polishing machine. We started with a coarse pad which removed any remaining Limescale which had impregnated the surface of the stone and moved onto the finer pads which polish the stone. Once this was complete the tiles were given a final clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product designed for regular use on stone or sealed tiled surfaces.
Day 3 -Sealing Basalt wall Tiles
We came back on the third day and after making sure the Basalt tiles had dried we gave it a final buffing to restore the stone to a deep high gloss shine. The last step was to seal the Basalt tile in order to protect it and make it easier to clean in the future and for this we applied three coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone.
Finally we used a rotary floor polisher fitted with a white buffing pad to buff the mosaic glass floor to a high shine.
Tiled wet room cleaned and polished in North London
These photographs were taken at a house in Ealing, West London where the customer had requested a deep clean and polish of the marble tiled floors installed in a kitchen and conservatory which had become dull and dirty over a period of time.
Marble Tiled Floor Polishing
The first step was to give the Marble floor a thorough clean throughout with a medium dilution of Tile Doctor Pro-Clean which is an industrial strength Tile Cleaner safe to use on natural stone floors, we also took this opportunity to use a stiff brush along the grout lines to get them nice and clean, the soiled cleaning solution was removed using a wet vacuum and the floor rinsed with clean water.
The next step was to use a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set of four; you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green polishing pad which provides a high polish, we managed to complete most of this process before the end of day.
Polishing and Sealing Marble Tile
The next day we completed the polishing process with the Green pad which really brought a deep shine to the floor. To protect the floor it was then sealed using Tile Doctor Colour Grow sealer which provides a natural finish whilst enhancing the natural colours in the tile. We waited for the sealer to dry before buffing it with a white buffing pad to bring up the shine further.
This terracotta floor installed in a house in Denham, at the southern end of Buckinghamshire, had become discoloured with ingrained soil and a mix of old sealers and wax coating leaving an unsightly looking kitchen floor that was in need of stripping, deep cleaning and reseal.
Cleaning Terracotta Tile
I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty alkaline product ideal for cleaning natural products such as Terracotta; this was scrubbed into the tiles quite aggressively with a black pad fitted to a rotary machine on slow speed. Once this had been completed we could see the remaining old sealers and wax layers and started to remove them using a strong tile stripper called Tile Doctor Remove and Go. Once we were satisfied we had removed all of the coatings we gave the floor a thorough rinse with clear water to remove any remaining residue and left it to dry overnight.
Sealing Terracotta Tile
The next day came back to do the sealing and checked the floor first for any spots we might had missed and also to ensure it had dried sufficiently. Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a satin finish. Terracotta is very porous and in the end the floor actually took nine coats of sealer before it was fully sealed. Applying a sealer does takes a long time to apply as you have to wait for it to dry before applying the next coat.
The work took two days in all and you can see the difference for yourself, the floor is much cleaner and will be a lot easier to maintain going forward.
Terracotta Floor Cleaned and Sealed in Buckinghamshire
The photographs on the page come from the kitchen and dining area of a house in High Wycombe which had previously been rented out to tenants and the client wanted required the Limestone Tiled floor tiles to be cleaned and polished before the next occupant moved in.
Cleaning a Limestone Tiled Floor
We started the project with a deep clean of the tiles and grout using a dilution of Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product specially designed for use on natural stone floors. This was left to dwell for a while and then agitated using a rotary machine fitted with a Black Scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor was then rinsed down with fresh clean water; the process was repeated until a satisfactory result was obtained and we also treated the discoloured grout lines with more Pro-Clean and a stiff brush.
Limestone Tiled Floor Polishing
We used a set of diamond encrusted Burnishing Pads fitted to a rotary buffing machine to polish the Limestone floor. These pads are ideal for restoring the shine on hard stone surfaces such as Limestone and Marble, the come in a set of four and you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. The floor was then washed down again, this time with Tile Doctor Neutral cleaner which is an everyday cleaning product and then left to dry overnight.
Sealing Limestone Tiles
On the second day we gave the Limestone a polish using a Green burnishing pad which is a very fine pad that provides a high polish. The last step was to seal the Limestone which we did with two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that brings out the colours in natural stone and provide lasting protection.
Limestone Tile Cleaning and Polishing in High Wycombe, Buckinghamshire
A customer recently purchased a property the village of Chesham and hoped we could improve the appearance of her textured marble tiled floors which had over a number of years become dull and lost the polished marble look one would expect from a floor of this quality.
Marble Tile Cleaning and Polishing
For polished stone like Marble and Limestone the only way to restore the finish is to burnish the floor and this floor was no different. The burnishing pads are diamond encrusted and come in a setup of four seventeen inch pads for use with a heavy rotary machine, each pad having a different purpose.
So we started with the Red pad which is designed to remove sealers together with a little water, we then took the opportunity to clean up the grout by applying a dilution of Tile Doctor Pro-Clean and scrubbing it into the grout lines to get them clean. Next step was to remove the soiled cleaning solution and wash the floor down with water before moving onto the white burnishing pad which will grind off ingrained dirt and is the first step in polishing the floor. We then completed the floor polishing using the Yellow then Green polishing pads which smooth down the surface and produce a shiny finish.
We were asked to improve the appearance of this Ceramic tiled floor and Grout installed in a kitchen in Chalfont St Giles which over a few years had become difficult to keep clean and the grout lines had become stained and discoloured.
Cleaning Tile and Grout
Our first task on day one was to clean the Ceramic tiles and Grout so we created a diluted 50/50 mixture of tile doctor Pro-Clean and Nanotech UltraClean, the two products combine to provide a very powerful tile friendly alkaline cleaner with tiny sized abrasive particles. This was left to soak into the tile and grout before being agitated and scrubbed with a scrubbing machine running on low speed. We also used stiff grout hand brushes along the grout lines. Once we were happy with the overall condition of the tile and grout it was washed down using clean water and the resultant soiled solution extracted from the floor using a wet vacuum. I’m pleased to say that using this method we were able to return the tile and grout back to its original colour.
Whilst this was a fantastic transformation the grout lines being porous would untreated soon become dirty and discoloured. The only answer to this problem is a permanent colour seal to the grout lines which not only aids the future floor cleaning, but improves the whole appearance of the floor.
Applying the Grout Colour
Before applying a Grout Colour it’s important to ensure the grout is clean of grease and dirt naturally we had just cleaned this floor so this was not a problem I only mention it in case you were considering taking on a similar task yourself.
Once the grout has dried you can start applying the colourant which is a relatively straightforward process of squeezing the product onto a toothbrush and running it onto the grout. Don’t be tempted to use an old toothbrush for this purpose as it may contaminate the colourant leading to discolouration in the finish.
We completed the project the next day using an Aqua Mix sand coloured Grout Colourant; the customer was extremely pleased and commented how whole clean and efficient the process was.
Tile Cleaning and Grout Colouring in Buckinghamshire
This Limestone tiled floor with Slate Inlays was installed in a house in Little Chalfont, Buckinghamshire; the previous sealer had failed and was no longer offering any protection allowing dirt to become ingrained in the stone and become dull from soiling.
Cleaning and Polishing Limestone Tiles
To get the Limestone Tiled floor back to its original condition we used a set of diamond encrusted 17” Burnishing Pads fitted to a heavy rotary buffing machine. It’s important to give the floor a quick clean first to prevent grit from getting trapped in the pads and leading to deep scratches on the surface. You start off with the coarse red pad together with a little water which can remove sealers before moving onto the other pads.
At this point we gave the floor a deep clean using Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product that’s safe to use on Stone floors mixed 50/50 with NanoTech Ultra-Clean which adds tiny abrasive particles into the solution; this combination is especially effective on grout so we took the opportunity to get into the grout lines as well. The resulting soiled solution was removed using a wet vacuum and the floor washed down with clean water before continuing the burnishing process with the White cleaning pad followed by the Yellow Polishing pad which smooth’s the surface and finally the Green pad which gives that high shine finish.
Sealing Limestone Tiles
The floor was washed down to remove any particles left over from the polishing and left to dry before we set about sealing using three coats of Tile Doctor Colour Grow. Colour Grow is recommended for a number of stone surfaces and does well to lift the natural colours in the stone as well as providing on-going surface protection.
Before leaving we recommended that the customer use Tile Doctor Concentrated Tile & Stone Cleaner for cleaning going forward, like Pro-Clean it’s an alkaline cleaning product that will clean the stone without eating into the sealant. The house owner was very satisfied with the results and promised to recommend our services to family and friends.
Details below of a newly laid Travertine Honed & Filled floor in Aylesbury that needed stripping and re-sealing. The work was done at the request of a building company who had just completed a pair of semi-detached houses laid with Travertine tiles on the ground floor. Unfortunately the tiling contractor had failed to clean the tile surface properly before sealing and had trapped particles of dust and debris into the sealer, as a result the whole floor was as rough as sandpaper and needed to be stripped and re-sealed prior to their clients moving in the following week.
Cleaning Travertine Tile
To remove the existing sealer and to polish the stone we used the Tile Doctor diamond burnishing system. This involves burnishing the floor with diamond encrusted pads fitted to a heavy rotary machine, the system consists of a set of four seventeen inch coloured pads and you work your way through the pads from red (sealer removal) through to green (final polishing). This work returned the stone to its original condition ready for sealing.
Sealing Travertine Tile
We sealed the floor with three coats of Tile Doctor Colour Grow which provides excellent stain protection whilst enhancing the natural colours in the stone. The building company was pleased that we had managed to resolve the problem before the owners moved in as it had avoided an embarrassing situation for them. Interestingly we have since completed three other jobs with this same type of problem.
Sealing Honed and Filled Travertine tiled floors in Buckinghamshire