Limestone Kitchen Floor Tiles Transformed in Knotty Green

Below are photographs of a Limestone tiled kitchen floor at a house in Knotty Green near Beaconsfield. The stone floor had lost its polish with use and now appeared flat and unattractive additionally the grout had darkened severely with dirt and was overdue a good scrub to get it clean.

Natural stone is actually a porous material that needs to be sealed in order to prevent dirt from becoming ingrained however unless its maintained constant foot traffic on floor tiles wears down the sealer leaving the stone vulnerable and difficult to clean effectively.

Limestone Tiled Kitchen Floor Before Cleaning Knotty Green

Burnishing and Cleaning a Limestone Tiled Kitchen Floor

If you have read other posts on my website, you will know that we find the best way to restore the appearance of polished stone is through the application of a set of diamond encrusted burnishing pads of varying grits to grind away dirt and slowly build the polish on the stone.

You start with the application of the coarse 400-grit pad which is fitted to a rotary buffer machine and applied to the floor with water to lubricate the process, the resultant slurry is then rinsed off with water and extracted with a wet vacuum. Next is the Medium 800-grit pad and then the Fine 1500-grit pad, both applied in exactly the same way.

Once I had completed the whole floor with three of the four pads I got to work cleaning the grout. For this, I used a strong dilution of Tile Doctor Pro Clean, our reliable alkaline cleaner, in combination with a handheld scrubbing brush. Once the grout was clean I gave the floor another rinse with water and then removed as much liquids and moisture as possible using the wet vacuum leaving it to dry off fully overnight.

Sealing a Limestone Tiled Kitchen Floor

The following day I returned to complete the floor starting with the application of the fourth diamond encrusted pad in the set of four which is a Very fine 3000-grit using a method we call a spray burnish which essentially involves applying the pad dry to the floor with a small amount of water sprayed on the stone. This process closes the pores in the floor and adds a good quality sheen to the tile.

Finally, I applied two coats of Tile Doctor Ultra Seal which is an impregnating sealer that penetrates into the pores of the stone to provide maximum stain protection from within. This sealer is also completely transparent, so it does not affect the natural look of the stone.

Limestone Tiled Kitchen Floor After Cleaning Knotty Green

The Limestone responded really well to the treatment and the floor now looks like new.
 
 

Polishing Limestone Kitchen Tiles back to Health in Buckinghamshire

Cleaning and Polishing a Limestone in Aston Clinton Communal Hallway

This Polished Limestone floor had been laid in the communal hallway of a block of flats in Aston Clinton and as you can see from the photograph below the stone had become ingrained with dirt over time and was now overdue for a deep clean and polish. Apologies for sounding like a dentist and also the photographs as the lighting wasn’t brilliant in the corridor.

Polished Limestone before cleaning in Aston Clinton

Cleaning Limestone Tile and Grout

Due to the heavy soling of the stone and grout lines we started by applying a strong dilution of Tile Doctor Pro-Clean which is an alkaline cleaning product that’s safe to use on Stone and Grout. The solution was scrubbed into the floor using a commercial rotary machine fitted with a fitted poly brush; once the cleaning solution had become dirty the floor was rinsed with water and the process re-applied until the stone and grout were clean.

Polishing Limestone Floor Tile

Our next task was to re-build the polish on the stone using a set of Tile Doctor Diamond encrusted burnishing pads which are applied to the tile in sequence from Coarse to fine further cleaning and polishing the stone until its returned to its original condition. The pads come in a set of four and you start with the coarse pad together with a little water. This this cuts through and removes surface grime, dirt and any remaining sealer. The floor is then rinsed and you move on through the remaining pads until the polish has been restored to the tiles. This process took up much of the first day so the floor was given a final rinse and left to dry overnight.

Sealing Limestone Tiles

On the second day we returned to find the tiles had dried and we started to seal the Limestone using three coats of Tile Doctor Colour Grow which is a colour intensifying sealer that soaks into the pores of the stone bringing out the natural colours whilst providing that all important lasting protection.

Polished Limestone after cleaning in Aston Clinton

 
 

Limestone Tile Cleaning and Polishing in Aston Clinton, Buckinghamshire

Deep Cleaning and Polishing a Limestone tiled kitchen floor in Marlow

We were asked by the new owners of this property in Marlow to clean and seal the Limestone tiled kitchen floor which was in a heavily soiled condition and it was apparent that the tiles and the grout lines hadn’t been professionally cleaned for some time.

Limestone Tiled Kitchen Floor Before Cleaning in Marlow Limestone Tiled Kitchen Floor Before Cleaning in Marlow

Cleaning a Limestone Tiled Floor

To lift the ingrained soiling and restore the grout we started by applying a dilution of Tile Doctor Pro-Clean which was hand scrubbed into the grout lines with a stiff grout brush, this was followed up with Tile Doctor Grout Clean-Up which returned the grout lines to the original colour. The resultant soiled solutions were then removed from the floor with the aid of fresh water and an industrial wet vacuum.

Polishing Limestone Tiles

Our next task was to re-hone the stones using the Tile Doctor Diamond encrusted burnishing pad system which cleans and polishes natural stone returning it to its original condition. The pads come in a set of four and you start with the coarse pad together with a little water. This this cuts through and removes surface grime, dirt and any remaining sealer. The floor is then rinsed and you move on through the remaining pads until the polish has been restored to the tiles. This process took up much of the first day so the floor was given a final rinse and left to dry overnight.

Sealing Limestone Tiles

On the second day we returned to find the tiles had dried and as expected and we started to seal the tile which we did with two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that soaks into the pores of the stone bringing out the natural colours whilst providing that all important lasting protection.

Limestone Tiled Kitchen Floor After Cleaning and Sealing  in Marlow Limestone Tiled Kitchen Floor After Cleaning and Sealing  in Marlow

The customer was amazed with the clean appearance of her tiled floors and said it had transformed her house ready to live in.
 
 

Limestone Tile Cleaning and Polishing in Marlow, Buckinghamshire

Cleaning and Polishing a Limestone tiled floor in High Wycombe

The photographs on the page come from the kitchen and dining area of a house in High Wycombe which had previously been rented out to tenants and the client wanted required the Limestone Tiled floor tiles to be cleaned and polished before the next occupant moved in.

Limestone Floor Before Cleaning Limestone Floor Before Cleaning

Cleaning a Limestone Tiled Floor

We started the project with a deep clean of the tiles and grout using a dilution of Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product specially designed for use on natural stone floors. This was left to dwell for a while and then agitated using a rotary machine fitted with a Black Scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor was then rinsed down with fresh clean water; the process was repeated until a satisfactory result was obtained and we also treated the discoloured grout lines with more Pro-Clean and a stiff brush.

Limestone Tiled Floor Polishing

We used a set of diamond encrusted Burnishing Pads fitted to a rotary buffing machine to polish the Limestone floor. These pads are ideal for restoring the shine on hard stone surfaces such as Limestone and Marble, the come in a set of four and you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. The floor was then washed down again, this time with Tile Doctor Neutral cleaner which is an everyday cleaning product and then left to dry overnight.

Sealing Limestone Tiles

On the second day we gave the Limestone a polish using a Green burnishing pad which is a very fine pad that provides a high polish. The last step was to seal the Limestone which we did with two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that brings out the colours in natural stone and provide lasting protection.

Limestone Floor After Cleaning

 
 

Limestone Tile Cleaning and Polishing in High Wycombe, Buckinghamshire

Limestone Tiled floor cleaned and polished in Little Chalfont

This Limestone tiled floor with Slate Inlays was installed in a house in Little Chalfont, Buckinghamshire; the previous sealer had failed and was no longer offering any protection allowing dirt to become ingrained in the stone and become dull from soiling.

Limestone Floor with Slate Inlays Before

Cleaning and Polishing Limestone Tiles

To get the Limestone Tiled floor back to its original condition we used a set of diamond encrusted 17” Burnishing Pads fitted to a heavy rotary buffing machine. It’s important to give the floor a quick clean first to prevent grit from getting trapped in the pads and leading to deep scratches on the surface. You start off with the coarse red pad together with a little water which can remove sealers before moving onto the other pads.

At this point we gave the floor a deep clean using Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product that’s safe to use on Stone floors mixed 50/50 with NanoTech Ultra-Clean which adds tiny abrasive particles into the solution; this combination is especially effective on grout so we took the opportunity to get into the grout lines as well. The resulting soiled solution was removed using a wet vacuum and the floor washed down with clean water before continuing the burnishing process with the White cleaning pad followed by the Yellow Polishing pad which smooth’s the surface and finally the Green pad which gives that high shine finish.

Sealing Limestone Tiles

The floor was washed down to remove any particles left over from the polishing and left to dry before we set about sealing using three coats of Tile Doctor Colour Grow. Colour Grow is recommended for a number of stone surfaces and does well to lift the natural colours in the stone as well as providing on-going surface protection.

Limestone Floor with Slate Inlays After
Before leaving we recommended that the customer use Tile Doctor Concentrated Tile & Stone Cleaner for cleaning going forward, like Pro-Clean it’s an alkaline cleaning product that will clean the stone without eating into the sealant. The house owner was very satisfied with the results and promised to recommend our services to family and friends.

Limestone Tiled Floor Restored in Buckinghamshire